🇬🇧

Documentation

Glossary

Insert Connections#

Connections hold structures together or connect loads to a load-bearing structure. For a static calculation, each connection must be at the correct points and its structural behavior must match the real construction. This page covers connections between structural members as well as Drops, ropes, and Bridles. Power and data connections are described separately in Power Planning and Network Planning.

Open the connection tool#

  1. In the Toolbar, select New Object.
  2. Select Connection as the resource type. The toolbar shows the connection types Rope, Truss Cross, Drop, Pipe, StackTrusses, Bridle 2 Leg, Bridle 3 Leg, and Bridle 4 Leg.
  3. Select the type you want and place the connection at the appropriate points or structural objects in the model. For the exact click sequences and details, see Inserting Connections in the Toolbar.
  4. Check the connection in 2D and 3D, and in Object Properties. End insertion with Cancel insert or press Esc.

Truss Cross at a truss crossing#

A Truss Cross connects two crossing or overlapping structural members for the static calculation. The structures must be recognized as load-bearing structural elements. Their axes must cross in plan view; also check the vertical separation in 3D. An overlap in plan view alone does not create a reliable connection. For the manual insertion steps, see Insert a Truss Cross.

Insert manually#

Select New Object → Connection → Truss Cross, then click the two structures one after the other. Alternatively, select the structural objects and run Rigging → Connections → Create Truss Cross. This command finds suitable crossings within the selection.

Generate automatically#

During calculation, Production Assist can automatically detect suitable Truss Crosses. The File → Settings... → App → Generate Truss Cross automatically option is enabled by default. Crossings within the same object are included only when Allow Truss Cross in the same Object is enabled. For partial calculations, Auto Add Truss Crosses when using partial calculation can include existing Truss Crosses in the calculation scope. Stack Truss aligns heights but does not create a Truss Cross.

Set the structural behavior#

Select the Truss Cross object and, under Object Properties → Truss Cross Type, choose the behavior that matches the real construction:

Truss Cross TypeBehavior in the calculation
FlexibleAllows rotation in all directions.
Compression OnlyTransfers compressive forces only.
Tension OnlyTransfers tensile forces only.
RigidTransfers forces and moments without relative movement.
NoneExcludes the Truss Cross from the static calculation.

New Truss Crosses initially use Rigid. Choose the type based on the actual connector and construction; a detected crossing does not determine its structural behavior. After calculation, Truss Cross Force and Truss Cross Force Characteristic show the transferred forces.

Insert Drops at structural crossings#

A Drop bridges a vertical distance between two crossing structural members. To create Drops at several crossings, select at least two structural objects and run Rigging → Connections → Create Drops. In the Place Objects to Structure dialog, select the Drop symbol and confirm with OK. Select Create to define a new symbol if needed; Download... opens the online resource selector.

Production Assist creates Drops at crossings between structural members from different objects when the vertical distance at the crossing is more than 100 mm. Existing Drops at the same points are skipped. If no Drop is created, check the selection, structural members, vertical distance, and whether a support is already present at the location.

To insert a Drop manually, select New Object → Connection → Drop, choose a Drop symbol if needed, then click the two structural objects involved. Production Assist searches between these objects for suitable Drop positions at their crossings. For a vertical Drop, the connection points must overlap in plan view. See Insert a Drop for the full click sequence. This manual method is separate from the automatic search with Create Drops, which requires you to select the structural objects first.

Ropes, Pipes, and Bridles#

For Bridles fitted with parts, the enabled Bridle Material Engine automatically checks rope paths, including Drops, against the 3D geometry of other objects. The default safety clearance is 100 mm. You can change it under File → Settings... → Bridle → Bridle Safety Clearance. If there is a collision or clearance conflict, the Material Engine first tries to rebuild the arrangement with sufficient clearance. Only remaining conflicts appear in the error list. Objects attached at the beginning or end of the respective leg are excluded. See Check rope paths for collisions and safety clearance for requirements and limitations.

The connection tool also provides Rope, Pipe, and Bridle connections with two, three, or four legs. The click sequence differs by type; see Inserting Connections in the Toolbar. For the calculation, make sure the rope and cross-section data and the support properties in Object Properties are correct. Then check the calculation results in the calculation overview and structural report. StackTrusses aligns a second truss system to a reference system. It moves the second truss but does not create a Truss Cross.

Create Drops for Loads and Create Bridle for Loads under Rigging → Connections create connections automatically: the first command connects each selected load object to the nearest structural member; the second creates a two-leg connection to the two ends of a member. Neither command opens a settings dialog. Check the generated connections in the model and calculation.

With Create Bridles, Production Assist can add a two-leg connection with a Drop to suitable neighboring structural members for selected supports, loads, and ordinary objects. For supports, the Drop starts at the upper rope end; for objects without supports, it starts at their load position, including load offset. The object does not need to be enabled as a load. Structural members and parent assemblies are not additionally used as load points. Two suitable structural members must be above the target point; if they are not, no connection is created. Insert House Rigging Points adds suitable House Rigging Points to existing rope-support connections. Neither command opens a dialog; check the added objects and their properties before calculating. For other Rigging commands and requirements, see the Rigging → Connections submenu.

Check a connection#

After inserting a connection, check:

  • Are the connection points on the intended structural members or loads?
  • Do the connected objects belong to the expected structural system? Use Rigging → Select System Objects to show the detected system group. See Check Connections in the Structural System.
  • Do the connection type and properties match the actual construction?
  • Are the calculated forces and deformations plausible?

A connection visible in the model does not replace an engineering check of the real connector and its capacity. For background and the calculation process, see Static Calculations; for more about Truss Crosses, see Create and Check Truss Crosses.